How to Change a Dyson Vacuum Cleaner Battery: Did You Know It’s This Easy?

Have you been struggling with your dead Dyson vacuum cleaner? Don’t fret! Changing its battery is much easier than you think.

Some of the links in this post are affiliate links, meaning we may earn a commission if you click through and make a purchase.

In this post, we’ll walk you through the surprisingly simple process step-by-step. Stick around and give your vacuum a new lease of life!

Ensuring Safety by Turning Off the Vacuum

How to Change a Dyson Vacuum Cleaner Battery

Before embarking on your Dyson vacuum battery replacement, it is paramount to ensure safety.

This is especially important when undertaking tasks like changing a Dyson vacuum battery.

The first crucial step in this DIY replacing of Dyson vacuum cleaner’s battery involves switching off your Dyson vacuum.

Why It’s Crucial To Switch Off Your Vacuum Cleaner

* Safety First: Electrical appliances can pose risks when handled while still connected to power sources.

Therefore, it’s essential for you to switch off your appliance before starting the process.
* Prevent Damage: Turning off your vacuum prevents any potential electrical faults that might occur in the course of replacement, thus helping you avoid unnecessary repair costs.

Steps for Safely Switching Off Your Vacuum Cleaner

1. Locate the power button: With a simple design crafted for user convenience, finding the power button on a Dyson cordless model is quite straightforward.


2. Press the button: Once located, press down firmly on the power button until all operations cease completely indicating that it’s successfully switched off.

In conclusion, knowing how to safely turn off your device before starting with steps to change a Dyson vacuum’s power source essentially ensures not just personal safety but also maintains longevity and efficiency of device during and after procedure.

With these preliminary measures set into place,you are now ready for next step in guide to replace Dyson vacuum cleaner battery: Detaching Wand and Bin for easy access.

Please note that despite this procedure seeming uncomplicated,safety should never be compromised.

So always recheck if device has been properly switched OFF before moving onto next steps in instructions for changing dyso nvacuum battery.

Detaching the Wand and Bin for Easy Battery Access

In this step of the Dyson vacuum battery replacement process, it’s all about setting up the stage for easy access to your vacuum’s power source or battery.

It involves detaching the wand and bin, which is relatively straightforward.

Begin by Disconnecting the Wand

Start off by pulling out your Dyson’s wand. You can easily do this by pressing down on its release button and then removing it from the main body.

Doing so will make your Dyson cordless vacuum battery change task a lot easier.

Moving on to Removing The Bin

Afterwards, focus on emptying your bin if not already done so. It reduces any possible mess during the next steps of changing your Dyson vacuum battery.

To remove it, locate a red latch located right where you detached the wand in previous step.


Press down twice firmly yet gently on that latch, allowing the bin to be freely detached from rest of device without much hassle.

Here are some quick steps:

  • Press down twice firmly yet gently at red latch.
  • The bin should now be easily detachable.
  • Carefully remove it away from rest of device.

These moves essentially facilitate torrential path for a successful DIY replacing Dyson vacuum cleaner’s battery task as per instructions outlined in this guide.

Please note: Go slow and steady while following these steps to avoid any unnecessary damage to components .

Locating and Removing the Necessary Screws for Battery Release

The third step in performing a Dyson vacuum battery replacement involves locating and removing the necessary screws to release your vacuum cleaner’s battery.

Remember, this process may vary slightly depending on whether you’re changing a Dyson V6/V7 model’s battery or dealing with a Dyson V8/V10 model.

Dyson V6/V7 Models

To commence with your Dyson cordless vacuum battery change, gather your Phillips screwdriver.

You’ll need it to unscrew the two screws attaching the power source of your device in place.

These models have one screw located at each end of the battery, one on top and another at bottom.

Dyson V8 Models

If you’re following these instructions for changing a Dyson vacuum cleaner’s battery specifically for an upgraded version like V8, there are three screws to remove- one behind handle and two under the power source itself.

  • For each variant of vacuums, simply locate these screws and use an appropriate screwdriver to unscrew them.
  • Note: Make sure to keep these tiny parts safely together as you’ll need them when installing new batteries into your device.

This particular step is central in our guide to replace Dyson Vacuum Cleaner Battery since every other operation depends on successfully executing this procedure-

  1. You can’t retrieve old batteries without releasing such fastenings first,
  2. Nor can new ones be installed without holes left behind by old fastenings available for reinsertion purposes!

In our DIY replacing dyson vacuum cleaner’s battery guide remember that patience is key; rushing could result in lost screws or damage to your vacuum cleaner.

So, now you know how to switch a Dyson vacuum cleaner battery; with the necessary screws removed, you’re just one step away from replacing a dead Dyson Vacuum Cleaner Battery

Removing Old Battery and Replacing with New Genuine Dyson Battery

To maintain the efficiency of your Dyson vacuum cleaner, it is crucial to replace the old battery with a new genuine Dyson vacuum battery replacement. Let’s explore how you can do this in simple steps.

Pull or Slide Out Your Old Battery

After successfully locating and removing all necessary screws, it’s time to release your old battery.

If your unit has a snap-in type power source like in some V6 models, press down on the release button located on the surface of the battery.

Now gently pull out your old changing Dyson vacuum battery.

On the other hand, if you have screwed-in batteries like in V7/V8/V10 models, simply slide out your Dyson cordless vacuum battery change once all screws are removed.

Insert Your New Genuine Dyson Vacuum Cleaner Battery

With your old one detached successfully, it’s time for step four – inserting a new battery. Here is a quick guide:

  • V6 Model: Align new replacement correctly and simply click into place.
  • V7/V8/V10 Models: Align appropriately and slide into slot until snugly fitted.

Next up is following reverse order of removal steps to reattach everything back in place – an essential part of these instructions for changing Dyson vacuum cleaner’s power source.

Remember! Always use only genuine Dyson replacements because using imitations can compromise its longevity and efficiency.

Also consider that if your machine is less than two years old then this DIY replacing would likely be covered under warranty so look into that before purchasing a new one!

Once everything is set up again after replacing dead dyson vacuum cleaner battery, give your vacuum a good amount of time to charge before using it again.

This completes the steps necessary in learning how to switch Dyson vacuum cleaner battery.

Happy cleaning!

Similar Posts